9 Use o p to set whether or not a subwoofer channel is measured.
Measure Set for measuring a subwoofer.
Skip | Set for no measuring of a |
| subwoofer. |
10Use o p to set whether or not a surround back channel is measured.
Measure | Set for measuring two surround back speakers. |
(2 spkrs) | |
|
|
Measure | Set for measuring a surround back speaker. |
(1 spkr) |
|
|
|
Skip | Set for no measuring of a surround back speaker. |
11Use opto set whether or not a front height channel is measured.
Measure Set to measure the front height speakers.
Skip Set when you do not want to measure the front height speakers.
12Use o p to set whether or not a front wide channel is measured.
Measure Set to measure the front wide speakers.
Skip Set when you do not want to measure the front wide speakers.
13Press RETURN B.
Proceed to page 23 STEP1 Preparation step 6.
Set up speakers
NOTE
After performing Audyssey® Auto Setup, do not change the speaker connections or subwoofer volume. In event of a change, perform
Audyssey® Auto Setup again.
70
version Basic
version Advanced
Information