Adjusting the volume of the speakers
You can adjust the channel level either according to the playback sources or to suit your taste, as described below.
nnAdjusting the volume of the different speakers
1 Press ZONE SELECT to switch the zone mode to J(MAIN ZONE). The J indicator lights.
2 Press AMP to set the remote control unit to
3 Press CH LEVEL.
5 Use o p to adjust the volume.
•You can directly turn “OFF” the subwoofer outputs during
Select “Subwoofer” and use o p to select “ON” or “OFF”.
CHANNEL LEVEL
Front L | |
Front R |
Subwoofer 
OFF
Convenient functions
nnAdjusting the volume of groups of speakers (Fader function)
This function lets you adjust (fade) the sound all at once from the front (front speaker / front height speaker / front wide speaker / center speaker) or rear (surround speaker / surround back speaker).
1 Press ZONE SELECT to switch the zone mode to J(MAIN ZONE).
The J indicator lights.
2 Press AMP to set the remote control unit to
3 Press CH LEVEL.
version Basic
version Advanced
CHANNEL LEVEL |
| |
Front L | When a headphone jack is inserted, the headphone channel level can | |
Front R | ||
Subwoofer | 0.0dB | be adjusted. |
| ||
Subwoofer | ON |
|
4 Use ui to select the speaker.
The speaker that can be set switches each time one of the buttons is pressed.
BD | 73 |
4 Press i to select “Fader”, then select the item to be adjusting using o p.
CHANNEL LEVEL |
|
|
|
|
| |
Front L |
|
|
|
|
| |
Front R |
|
|
|
|
| |
|
|
|
|
| ||
Center | 0.0dB |
|
|
|
|
|
|
|
|
|
| ||
Subwoofer | 0.0dB |
|
|
|
|
|
Surround L |
|
|
|
|
| |
Surround R |
|
|
|
|
| |
Surr. Back L | 0.0dB |
|
|
|
|
|
|
|
|
|
| ||
Surr. Back R | 0.0dB |
|
|
|
|
|
Fader | Front |
|
|
|
|
|
|
| Rear | ||||
|
|
|
|
|
|
|
5 Use o p to adjust the volume of the speakers. (o : front, p: rear)
•The fader function does not affect the subwoofer.
•The fader can be adjusted until the volume of the speaker is adjusted to the lowest value of
Information