Setting items | Setting details |
|
|
Setup Lock | ON : Turn protection on. |
Protect settings from | OFF : Turn protection off. |
inadvertent change. | When canceling the setting, set “Setup Lock” to “OFF”. |
|
NOTE
| When “Setup Lock” is set to “ON”, the settings listed below can no | |
| longer be changed. Also, “SETUP LOCKED!” is displayed if you attempt | |
| to operate related settings. |
|
| • Menu operations | • Channel Level |
|
| |
Firmware Update | Check for Update : Check for firmware updates. You can also check | |
Update the firmware of the | approximately how long it will take to complete an update. | |
receiver. | Start : Execute the update process. | |
| When updating starts, the power indicator becomes red and the menu | |
| screen is shut down. The amount of update time which has elapsed is | |
| displayed. |
|
| When updating is complete, the power indicator becomes green and | |
| normal status is resumed. |
|
•If updating fails, the set automatically retries, but if updating is still not possible, one of the messages shown below is displayed. If the display reads as shown below, check the settings and network environment, then update again.
| Display | Description |
| Updating fail | Updating failed. |
| Login failed | Failure to log into server. |
| Server is busy | Server is busy. Wait a while then try again. |
| Connection fail | Failure in connecting to server. |
| Download fail | Downloading of the firmware has failed. |
|
|
|
| SYSTEM SETUP |
|
|
Setting items | Setting details |
|
|
Add New Feature | Upgrade : Execute the upgrade process. |
Display new features that | When updating starts, the power indicator becomes red and the menu |
can be downloaded to this | screen is shut down. The amount of update time which has elapsed is |
unit and perform an update. displayed.
When upgrading is complete, the power indicator becomes green and normal status is resumed.
• If the upgrade is not successful, an error message identical to those in “Firmware Update” will appear on the display. Check the settings and network environment, then update again.
Upgrade Status : Display a list of the additional functions provided by the upgrade.
See the DENON website for details about updates.
When the procedure is complete, “Registered” is displayed in this menu and updates can be carried out. If the procedure has not been carried out, “Not Registered” is displayed.
The ID number shown on this screen is needed when carrying out the procedure.
The ID number can also be displayed by pressing and holding the main unit’s TUNER PRESET + and TUNER PRESET – for at least 3 seconds.
vSee overleaf
version Basic
version Advanced
Information
BD | 118 |