Denon DN-HC4500 manual Device Change, Display

(3) Display

!6 !5 !4 !3!2 !1 !0

q w e r t y u i o

!4Time mode indicators

•The display switches as follows when the Time button is pressed:

ELAPSED:

The elapsed playing time from the beginning of the track is displayed.

REMAIN:

The track’s remaining time is displayed.

T.ELAPSED:

The playing time from the first track on the disc is displayed.

T.REMAIN:

The remaining time of all the tracks on the disc is displayed.

ENGLISH

!5Track indicator

•This indicates the number of the currently playing track.

!6Connection indicators

•These indicate the connected devices controlled by the DN-HC4500.

PC:

The DN-HC4500 is controlling the DJ software on a PC/MAC.

CD:

The DN-HC4500 is controlling a DN-D4000/ D4500/BU4500.

✽Playback of the USB audio signals from a PC continues while in the CD mode.

q Play Position indicators

• The white position indicator lights during

normal playback, and the position in the track

is indicated by the elapsed time.

uKEY ADJ. indicator

•“KEY ADJ.” lights when in the key adjust mode.

4 DEVICE CHANGE

• If the time to the end of the track is shorter

than the specified time, the playback position

indicator flashes according to the track’s

remaining time (EOM) to indicate the end of

the track.

wLoop mode indicators

•The DN-HC4500 has two loop mode indicators, A and B.

The A and B indicators light when A and B are set.

iVisual Marker

•The playback position is indicated according to the playback status of the different decks.

oMEMO indicator

•The “MEMO” indicator lights when there is memo data stored for the track that is currently playing or set to standby.

!0Pitch indicator

• This indicates the playing speed (pitch).

Press the SOURCE button to display the “SOURCE” selection screen.

	Note:
1	• When the BACK button is pressed, source
	switching is completed and the mode
	returns to the normal model.

3

Press the knob again to enter. “Completed!” is displayed and source switching is completed.

e Character display	!1BPM indicator
	• This lights when the BPM is displayed in the
• This block displays various operational
	pitch display section.
information, text message, etc.

Turn the PARAMETERS

knob to select the device.

Press the knob again to

enter.

rFile data indicators

• These indicate the type of file being played.

tExternal device connection confirmation indicator

•This lights when MIDI signals have been sent or received between the DN-HC4500 and an external device.

!2Play mode indicators

•These indicate the play mode.

CONT.:

Once playback of a track finishes, the next track is played.

SINGLE:

Playback stops once the end of that track is reached.

	“OK to CHANGE” is displayed.
	Note:
2	• The mode switches to “NO” when the
	PARAMETERS knob is turned while “OK to
	CHANGE?Ø” is displayed.
	• When in the “NO” mode, press the
	PARAMETERS knob or BACK button to
	return to step 1.

y Keyboard indicator	!3Minute, second and frame displays
• This lights when the light command is received	• This indicates the position currently playing
from a computer.	or at which the standby mode is set.

5

ENGLISH