6

SEAMLESS LOOP/HOT START/STUTTER

 

Playing Seamless Loops

 

 

 

 

 

• When the B point for A1 is detected

Seamless Loop/Hot Start/Stutter (A1,A2 buttons)

 

after playback started from A1 point,

 

playback returns to A1 point with

 

 

 

 

 

 

Operation display

 

 

4

seamless. While A1 to B looping, B

 

(refer to the section describing the display)

point for A2 ignored.

 

 

 

 

 

• When the B point for A2 is detected

 

 

 

 

 

after playback started from A2 point,

 

 

 

 

 

playback returns to A2 point with

 

 

 

 

 

seamless. While A2 to B looping, B

 

 

 

 

 

point for A1 ignored.

 

 

 

 

 

Exit/Reloop

 

 

 

 

 

r In Seamless Loop

 

 

 

 

 

playback, you can force

 

 

 

 

 

exit from or return to

 

 

 

 

 

the loop.

 

 

 

 

 

EXIT:

 

 

 

 

5

While the Seamless Loop playback, push

 

 

 

 

the EXIT/RELOOP button to exit from

 

 

 

 

 

 

 

 

 

 

loop. DN-D4000/D4500/BU4500 continues

 

t, y

e, y

 

 

playback after the B point.

 

 

 

RELOOP:

 

q, w, y

r

 

 

 

When the EXIT/RELOOP button is

 

 

 

 

 

 

 

 

 

 

pushed after exit the loop, Seamless

 

Setting the A point

 

Setting the B point for Seamless Loop

 

Loop playback resumes from the A point.

 

(loading the Hot Start data)

 

e When the B button is

 

 

 

 

q Push the A1 or A2

 

pushed after setting

 

button to set the A

 

the A point or after

1

point and Hot Start data

 

starting Hot start

loading starts.

 

playback, the B point is

 

• A1 and A2 buttons can be used

 

set and Seamless Loop playback starts

 

separately for each Hot Start.

3

from the A point.

 

• When an A point is set, the corresponding

• The B button works with respect to the

 

A button and “ ” display light and that

 

A point operated before the B button

 

button is set to the Hot Start mode.

 

was pushed.

 

Starts Hot Start

 

• If the B button is pushed during Seamless

 

 

Loop playback or after EXIT playback, the

 

w When A1 or A2 button

 

 

 

B point moves to the point at which the

2

is pushed, Hot Start

 

 

button was pushed.

playback starts from

 

 

 

• When the B point is set, the B and “ ”

 

the corresponding A

 

 

 

displays light.

 

point.

 

 

 

 

ENGLISH

Stutter

• A1 and A2 points can be also used for Stutter playback.

tTo enable stutter

6 playback, push FLIP

button for A1/A2 buttons, then “ ” display turns off.

Press the FLIP button to switch between the Hot Start/Seamless Loop and Stutter modes.

Clear the A1/A2 point

yWhile pressing the FLIP button, push the A1 or A2 button to clear the corresponding A and B points.

Or push the FLIP button for more than 1 sec to clear both A1 and A2 points at once.

7

Quickly pressing the “FLIP” button first

 

and then A1, A2 or B buttons will clear

 

these points individually.

7

ENGLISH

Page 11
Image 11
Denon DN-HC4500 manual Seamless LOOP/HOT START/STUTTER, Seamless Loop/Hot Start/Stutter A1,A2 buttons, Exit, Reloop