Denon DN-S3000 manual Seamless Loop/Hot Start/Stutter, t, y y, English

8SEAMLESS LOOP/HOT START/STUTTER

Seamless Loop/Hot Start/Stutter

ENGLISH

	Stutter
	• A point can be also used for Stutter
	playback.
	t To enable stutter playback,
5	push FLIP button for A button,

Operation display (refer to the section describing the display)

q, w,
t, y y	e r

then FLIP LED turns off.

Press the FLIP button to

switch between the Hot

Start/Seamless Loop and

Stutter modes.

Clear the A/B point

yWhile pressing the FLIP/(CLR) button, push the A button to clear the corresponding A and B points.

Or push the FLIP button for more than 1

sec to clear both A and B points at once.

6• While pressing the FLIP/(CLR) button, push the B button to clear the only B points.

A

Setting the A point (loading the Hot Start

• If the B button is pushed during

data)

q Push the A button to set the A point and Hot Start data

A

Seamless Loop playback or after EXIT

3-2	playback, the B point moves to the point
	at which the button was pushed.

1loading starts.

•When an A point is set, the corresponding A button and FLIP LED light and that button is set to the Hot Start mode.

Starts Hot Start

A

2w When A button is pushed,

Hot Start playback starts from the A point.

Setting the B point for Seamless Loop

eWhen the B button is

	pushed after setting the A
3-1	point or after starting Hot
	start playback, the B point is
	set and Seamless Loop
	playback starts from the A
	point.

• When the B point is set, the B and LOOP

LEDs light.

Exit/Reloop

r In Seamless Loop playback, you can force exit from or return in the loop.

EXIT:

While the Seamless Loop playback, push

4 the EXIT/RELOOP button to exit from loop. DN-S3000 continues playback after the B point.

RELOOP:

When the EXIT/RELOOP button is pushed after exit the loop, Seamless Loop playback resumes from the A point.

13