Denon DN-S3000 manual Connections/Installation, 1CONNECTIONS, 2INSTALLATION, Washer

2CONNECTIONS/INSTALLATION/

INSTALLING THE 7“(17cm) RECORD ADAPTOR

ENGLISH

(3)INSTALLING THE 7” (17cm) RECORD ADAPTOR

Your own 7” (17cm) vinyl record can be installed on this product by using the provided adaptor.

This original design grants you the freedom to use your favorite vinyl record for that ultimate analog turntable feel.

(1)CONNECTIONS

1.Turn off the POWER switch.

2.Connect the RCA pin cords between the DN-S3000 outputs and inputs of your mixer.

3.If your mixer has Fader Start function such as our DENON DN-X800 or DN-X400, connect FADER 1, 2 jacks to the mixer using 3.5 mm stereo mini cord.

4.If you have a DENON DN-X800 mixer, you can use the X-Effect function to control the Hot Starts, Samplers and Brake from the crossfader to get wide variety of operation.

Fig. 1 : Fader start connections example 1 Fig. 2 : X-Effect connections example 1

*Make sure the record used is flat and not warped.

•7” (17cm) record adaptor accessories

	q Adaptor	1
	w Screw(<head)	3
	e Washer(Reserve)	1	Washer
1.	Remove a screw B (Hexagon socket head)
	and pull out Stabilizer, Scratch disc, Slip mat,		Slip mat
	Slip sheet (White) and Anti-static sheet
	(Black).
2.	Set Adaptor in the hole of 7” record.		Anti-static
3.	Install Stabilizer in Adaptor.		sheet

B(Hexagon socket head) Stabilizer

Scratch Disc

Slip sheet (White)

FADE FADE CH1 CH2 CH3 CH4 Rch1 Rch2

DN-X400

FADE FADE

CH1 CH2 CH3 CH4 Rch3 Rch4 X'EFFECT

DN-X800

4.	Fix Adaptor with 3 screws. A (<head).	(Black)
5.	Install Slip sheet (White), Slip mat and 7”
	(17cm) record adaptor in Shaft of the product.
	(Do not install Anti-static sheet (Black).)

Attention

Fit the D shape of Shaft to the D hole of Stabilizer.

LINE OUT FADER

DN-S3000

X'EFFECT X'EFFECT

IN OUT

LINE OUT FADER

DN-S3000

CD1

X'EFFECT X'EFFECT

IN OUT

LINE OUT FADER

DN-S3000 or DN-S5000

CD2

X'EFFECT X'EFFECT

IN OUT

6. Install a screw B (Hexagon socket head) through Washer.

A

Adaptor ( + head)

7" (17 cm) record

RCA cord

3.5 mm stereo mini cord

•X-EFFECT playback is possible with the CD 1 and CD 2.

•The memos of player and player can be compared when the CD players are connected by X-EFFECT.

•Relay play

B (Hexagon socket head)

Washer

(2)INSTALLATION

The DN-S3000 will work normally when the unit is installed with in 20 degrees off the level surface. If the unit is titled excessively, the disc may not be loaded properly.

NOTE:

Standing up of playback slows unusually after trans porting the product.At the time, push center of the !1Scratch Disc lightly.

MAX 20°

Front

Stabilizer	7" (17 cm)
	record adaptor
	Slip mat
	Slip sheet (White)
	Shaft

NOTE:

• When RECORD to be used and friction of Slip mat are small, it may be unable to playback normally.

7