Denon DN-S3000 manual Platter Effect, q e t, English, w r

12PLATTER EFFECT

w r

★1 ★2 ★3 ★4

q e t

BRAKE

Simulates a winding-down sound of a turntable coming to a full stop slowly.

Adds a echo sound when playback stops.

2-1	e The BRAKE function can
	be turned on and off by
	pressing the BRAKE
	button.
	BRAKE TIME
	When the BRAKE turn on, the PARAMETERS
	LED flashes and parameter are displayed.
	If you use with default
	settings, there is a 4
	second	time	out	of
	inactivity	for the BRAKE
	button once selected and
	PARAMETERS		knob	if
	adjusted. After 4 seconds,
	and exits out of the BRAKE PARAMETERS
	menu.			PUSH
				ON / OFF
2-2	r The BRAKE time can
	be selected with the
	PARAMETERS knob.

•When the PARAMETERS knob is pushed, the time is entered and the BRAKE time selection mode is cancelled.

★2 The BRAKE is activated when the 13 button is pushed during playback.

ENGLISH

DUMP/RVS

t The mode switches in the

3following order each time

-1

the DUMP/RVS button is

pressed: DUMP → RVS → off.

DUMP:

Reverse playback is performed for the specified time. Plays the sound backwards while continuing in a forward motion without losing “elapsed time” when you return back to

3-2normal (forward) play.

★3 Each push of the 13 button switches between DUMP playback and normal playback.

•The reverse play turns off when the Hot Start or stutter is started.

	RVS (REVERSE):
	★4 Each push of the 13 button switches
3-3	between reverse playback and normal
	playback.
	• The reverse play turns off when the Hot
	Start or stutter is started.
	PLATTER MODE MEMO
	The DRAG-S on/off setting and time data, and
	the BRAKE on/off setting and time data for
	which the Platter effect function is to be used
	can be stored in the preset mode.

4 • After making the desired settings, enter the

preset mode and stores the settings at

DRAG-S (DRAG START):

Simulates the dragging sound of a turntable starting up from a stop mode.

1-1q The DRAG-S function can be turned on and off by pressing the DRAG-S button.

DRAG-S TIME:

When the DRAG-S turn on, the PARAMETERS LED flashes and parameter are displayed.

1-2If you use with default settings, there is a 4 second

time out of inactivity for the

DRAG-S button once selected and PARAMETERS knob if adjusted. After 4

seconds, and exits out of the DRAG-S menu.

1-3

w The DRAG-S time can	PARAMETERS
	PUSH
be selected with the	ON / OFF
PARAMETERS knob.

•When the PARAMETERS knob is pushed, the time is entered and the DRAG-S time selection mode is cancelled.

★1 The DRAG-S is activated when playback is started with the 13 button.

“PRESET (5)”.

Once the settings are stored, they are

automatically set each time the power is

turned on. (See “PRESET” on page 19.)

17