SAFETY INFORMATION PRODUCT IDENTIFICATION
3
SAFETY INFORMATION
Continued
6. | Carefully supervise young children when they are in the room |
| with stove. |
7. | Do not modify the burner or stove under any circumstances. Any |
| parts removed for servicing must be replaced prior to operating |
| stove or burner system. |
8. | Turn burner system off and let cool before servicing, install- |
| ing, or repairing. Only a qualified service person should in- |
| stall, service, or repair the stove or burner system. Have burner |
| system inspected annually by a qualified service person. |
9. | You must keep control compartments, burners, and circulat- |
| ing air passages clean. More frequent cleaning may be needed |
| due to excessive lint and dust from carpeting, bedding mate- |
| rial, pet hair, etc. Turn off the gas valve and pilot light before |
| cleaning stove or burner system. |
10. | Have venting system inspected annually by a qualified service |
| person. If needed, have venting system cleaned or repaired. |
| See Cleaning and Maintenance, page 29. |
11. | Keep the area around your stove clear of combustible materi- |
| als, gasoline, and other flammable vapor and liquids. Do not |
| run burner system where these are used or stored. Do not place |
PRODUCT IDENTIFICATION
Cast Iron
Stove Body
Log Set
| L |
| I OT |
OF | O |
IN OUT
Piezo Ignitor
Control Valve
Cast Iron
VentStove Body
Opening
| items such as clothing or decorations on or around stove. |
12. | Do not use this stove to cook food or burn paper or other objects. |
13. | Never place anything on top of stove. |
14. | Do not use any solid fuels (wood, coal, paper, cardboard, etc.) |
| in this stove. Use only the gas type indicated on burner system |
| nameplate. |
15. | This appliance, when installed, must be electrically grounded |
| in accordance with local codes or, in the absence of local codes, |
| with the National Electrical Code, ANSI/NFPA 70, or the Ca- |
| nadian Electrical Code, CSA C22.1. |
16. | Do not obstruct the flow of combustion and ventilation air in |
| any way. Provide adequate clearances around air openings into |
| the combustion chamber along with adequate accessibility |
| clearance for servicing and proper operation. |
17. | Do not install stove directly on carpeting, vinyl tile, or any com- |
| bustible material other than wood. The stove must set on a metal |
| or wood panel extending the full width and depth of the stove. |
18. | Do not use stove or burner system if any part has been ex- |
Rear
Cover
Pilot
Assy
Blower with
Adjustment
Knob (Optional
Installation)
Stove |
Front |
Burner |
Glass |
Door Assy |
Lava Rock |
| posed to or under water. Immediately call a qualified service |
| person to arrange for replacement of the unit. |
19. | Do not operate burner system if any log is broken. |
20. | Do not use a blower insert, heat exchanger insert, or other ac- |
| cessory not approved for use with this stove. |
21. Do not operate burner system with glass door removed, cracked, | |
| or broken. |
22. | Provide adequate clearances to air openings. |
Glowing | Grate Assembly | |
Embers | ||
|
Figure 1 - DESA