Desa SDVBND, SDVBPD installation manual Continued, Legs with leg leveler bolts 1- Bottom door

6

CAST IRON STOVE AND DIRECT-VENT BURNER SYSTEM ASSEMBLY

Stove Body Assembly (Cont.)

CAST IRON STOVE AND DIRECT-VENT BURNER SYSTEM ASSEMBLY

Continued

6.Remove all contents from inside stove cavity. Contents include:

(1)- Stove bottom [Amity Only] (Discard - Not used with this application)

(4)- Legs with leg leveler bolts

(1)- Bottom door

(3)- Top grates

(1)- Hardware kit bag with fasteners

7.Carefully lay stove body on back to attach bottom components to stove body (see Figure 7). Rest stove on drop cloth or blanket to avoid scratching stove edges.

8.Remove remaining pallet wood attached to bottom of stove body (see Figure 8). Use an adjustable wrench to remove bolts.

9.Fasten each leg to stove with four (4) M8 x 1.25 - 20mm bolts. Use a flat washer and lock washer with each bolt. Tighten bolts into threaded holes on stove body (see Figures 9 and 10). Use an adjustable wrench or a 12mm and 6mm socket.

10.Attach stove door by inserting step bolt through door hinge pivot hole and into threaded hole in stove body (Figures 9 and 11). Use an adjustable wrench or a 12mm socket to fasten step bolt. Tighten step bolt until snug. Make sure door moves freely.

	Top of Stove Unit
	Front of	Top of
Front of	Stove Unit	Stove
		Unit
Stove
Unit	Pallet
Drop	Wood
	Bolted to
Cloth/	Bottom of
Blanket	Stove Body

11.Install door catch bolt (M8 x 1.25-55mm with two M8 hex nuts) into threaded hole on stove body (see Figure 9). Use an adjust- able wrench or a 12mm socket. The catch bolt has two hex nuts attached to it (see Figure 12). The top nut is a bolt stop and the bottom nut is for door leveling adjustment.

Door Hinge Step		Door Catch Bolt
		With Adjustable
Bolt Hole	Front	Hex Nuts Hole

Bottom of	Leg Hole
Stove Unit

Figure 9 - Locating Threaded Holes for Legs and Door Attachment

Washers	Bottom Of
Bolt
	Stove Unit

Leg

Figure 10 - Attaching Stove Legs (Oxford™ Model Shown)

Figure 7 - Laying Down Stove On Side		Stove Door
Front	Pallet	Threaded	Door	Bolt Stop
		Hole
	Wood
Bolt
	Bottom Of	Door Hinge
	Stove Unit
Pallet
Wood		Step	Door Claw	Adjusting
		Bolt		Nut
Figure 8 - Removing Pallet Wood From The Bottom of The Stove			Catch
			Bolt
		Bolt Shoulder	Figure 12 - Catch Bolt and
		Figure 11 - Attaching Stove Door
			Door Claw Orientation

For..com

112126-01B