Location and Space Requirements (Cont.)
CAST IRON STOVE AND
Stove Body Assembly
5
PREPARATION
Continued
3.Proper clearances must be maintained, see Figures 3 and 4.
4.This stove is a freestanding unit designed to set directly on the floor. If your stove is to be installed directly on carpeting, vi- nyl tile, or any combustible material other than wood, it must be installed on a metal or wood panel extending the full width and depth of the stove. See Figure 5.
26 1/4"
Front
19 1/2"
Ceiling
42"
(106.68 cm)
36"
(91.44 cm)
from
Front
4"
(10.16 cm)
from
Back
Wall 27"
Figure 5 - Stove With Burner System Bottom Dimensions
CAST IRON STOVE AND
STOVE BODY ASSEMBLY
1. | Lift off corrugated box enclosing stove body crating. |
2. | Remove all screws fastening the wood frame enclosure. Spread |
| wood frame open and lift away from |
Floor |
29" |
(73.66 cm) |
4" |
(10.16 cm |
6" |
(15.24 cm) |
Front |
| The bottom pieces of pallet wood will remain bolted to the |
| stove body. |
3. | Remove plastic bag from stove body. |
4. | Locate the product identification label on the carton and record |
| the model number and 7 digit serial number in the space pro- |
| vided in the back of this owner’s manual. Retain this opera- |
| tion and installation manual for future reference and warranty. |
5. | Amity Only:Remove the six (6) bolts on the back stove panel |
| with an adjustable wrench or a 10 mm socket. Discard the back |
| panel and retain the bolts and washers to attach the rear cover |
| provided with the burner system. |
Figure 3 - Clearances for Standard Installation
4" 
(10.16
cm)
| Bolt |
4" | Back Stove |
(10.16 | Panel |
cm)
Figure 4 - Clearance for Corner Installation | Figure 6 - Removing Back Panel (Amity Stove Only) |
For more
visit www.
.com
