| Appendix A: Router Configuration |
|
|
Line #2: |
|
Starting Port: | 9001 |
Ending Port: | 9001 |
Server IP Address: | Type in the camera’s IP address, for example: |
| 192.168.0.5 |
5.Click Apply to save the settings. IP Camera should now be configured to work with your router and be accessible from the internet.
FVS318 – ProSafe VPN Firewall
1.Log into your router using your router IP.
2.On the main page, click on Add Service on the left side of the screen.
3.Click Add Customer Service.
4.In the Name field enter a name for the camera, for example: IP Camera Web:
Type: | TCP |
Start Port: | 81 |
Finish Port: | 81 |
5.Click Apply to save the settings.
6.There is a bug in the NETGEAR FVS318 1.4 firmware that does not record any entry that uses port 80. If you intend to use port 80, you will initially need to enter 81 for the Start and Finish port, and then edit the entry to port back to 80. Click on Add Service on the left side of the screen.
7.In the Service Table window select IP Camera Web and click Edit Service.
8.Change the Start and Finish port to 80. Click Apply.
9.On the main page, click on Add Service on the left side of the screen and then click Add Custom Service. In the Name field enter a name for the camera, for example: IP Camera Cam.
Type: | UDP |
Start Port: | 9001 |
Finish Port: | 9001 |
10.Click Apply to save the settings.
11.On the main page, click on Ports at the side of the screen.
A.Click Add.
B.For Service Name select: IP Camera Web
C.Action: ALLOW always
iCAMView user manual |
