Chapter 5: Web Manager
“Pan Control”
Choose from “Normal” or “Reverse”. This is to set the mirror function of the camera and fix the image the way the user desires each time the user logs on to view.
“Tilt Control”
Choose from “Normal” or “Reverse”. This is to set the image to its right side up. Similar to the “Pan Control” function.
Click “Apply” to save changes. Otherwise, all changes will be lost.
2.3.2 Network
This option determines the IP Camera Network settings.
i.IP Address
These items were all setup earlier in Setup Wizard. Enter new addresses and click “Apply” to change.
Fig.19. IP Camera IP Address Settings
“IP Address”
This item determines IP Camera IP Address.
“Subnet Mask”
This item sets IP Camera Subnet Mask. The value is normally 255.255.255.0
“Gateway”
This item is to set IP Camera Gateway.
“Obtain an IP address”
This allows the user to choose either to set IP Camera IP Address manually or via DHCP. IP Camera will reboot after the above settings have been changed.
ii.DNS Server IP
Fig.20. IP Camera IP DNS Server IP
“Primary DNS Server IP”
This item sets IP Camera primary DNS Server IP address.
“Secondary DNS Server IP”
iCAMView user manual |
