Chapter 4: Using Utility to Setup IP & Update Firmware
Select the IP Camera on the right display screen, and then click “IP Configuration”. This will bring up the IP Address Configuration window. There are two tabs;
•IP Address
•Advanced (for port setting configuration)
2.3.1 IPAddress
Use this section to set the IP Address of IP Camera.
When using IP Camera for the first time, it is advisable to choose the “Using Static IP Address” option. For this option, the user will have to enter an IP Address, Subnet Mask and Gateway of their choice (refer to Appendix C for IP address explanation).
Fig.9. IP Configuration: Set an IP Address for IP Camera
Once the IP Address is set, you will be able to connect to IP Camera webpage by entering this IP Address into a standard browser.
“Obtain an IP address by DHCP or BOOTP”
The IP address, Subnet Mask and Gateway is acquired directly and assigned automatically by the system.
2.3.2 Advanced
This section sets security password against unauthorised access to devices through Utility.
iCAMView user manual |
