7.Parts G2, G3, G4, G5 and G6 will arrive pre‐ assembled on the unit. Remove the four (4) hex bolts (G5) from the lower console mast front cover (G6) and set aside. Remove hex bolt G2 from the right side lower console mast cover (G4) and set aside with the two
(2) G1 hex bolts.
8.Gather the left (G3) and right (G4) lower console mast covers and bring together as a clamshell over the console mast/main frame union. Align covers with the mounting holes in the main frame and loosely thread the two (2) G1 hex bolts into place. Loosely install hex bolt G2 through the plastic cover G4 and into cover G3.
9.Install the lower console mast front cover (G6) by threading the four (4) hex bolts (G5) through the face and into parts G3 and G4. Do not over‐tighten.
10.Tighten hex bolts G1 and G2. Do not over‐tighten and be aware of improper alignment as the plastic parts come together.
900Er Owner’s Manual
11
