Dimension One Spas 1998

1998

’

ual

LIGHT CONTROL:

Push the LIGHT control pad once to activate the brightest setting. A sec-

ond push will activate the medium setting and a third push will activate

the dimmest setting. The bottom line of the LCD will read the light level

for 5 seconds (i.e. LIGHT HIGH, LIGHT MEDIUM, LIGHT LOW).

Push the LIGHT control pad a fourth time to turn off the light. The light

will automatically turn off after 4 hours of continuous operation.

TEMPERATURE CONTROL:

When the UP or DOWN control pad is pushed to change the set tempera-

ture, the bottom line of the LCD will read SET TEMP XXX˚ F. When

the spa is in a heating mode, the top line of the LCD will read the current

temperature and the bottom line will read SPA HEATING TO XXX˚ F.

ENTER PAD:

This pad is used to exit any programming sequence at any time.

PROGRAM PAD:

This pad is used to initiate the time setting, filter programming, and other

programming features. For more information, see the next section,

“Programming the Scrolling Message Center”.

DIMENSION ONE SPAS ICON PAD (LOGO):

The ICON pad is used to toggle between the spa temperature and the

time-of-day. It is also used to initiate the panel lock features and func-

tions as a reset.

LIQUID CRYSTAL DISPLAY:

The LCD continuously shows the operating status of the spa, as well as

the various monitoring functions, self-diagnostics, and programming

information.

PROGRAMMING THE SCROLLING MESSAGE CENTER

Your Scrolling Message Center is the most advanced in the industry and

can virtually walk you through customizing your spa to your exact needs.

When your spa is first powered up, it will automatically default into the

programming mode. If, within 5 seconds, you do not proceed with the