31
1998
O
w
n
er
’
s
Ma
n
ual
2) Push the PROGRAM pad
3) Push the ENTER pad
The top line of the LCD will read “RESET?”
The bottom line of the LCD will read “IF SO, PUSH ICON”
4) Push the ICON pad to reset the entire control system to factory
defaults.
SCROLLING MESSAGE CENTER MESSAGES
Because of the advanced programming features of your scrolling display,
your spa will prompt you when you need to perform routine maintenance.
For example:
RINSE FILTERS
Every other month, the top line of your LCD display will read, “RINSE
FILTERS” and the message “REMOVE FILTERS & RINSE WITH
HOSE... PUSH ICON TO RESET” will scroll from right to left on the
bottom line of the display. To reset this message, push the Dimension
One Spas Icon (logo) pad located at the right hand side of the control.
CLEAN FILTERS
Every alternating month, the top line of your LCD display will read,
“DIRTYFILTERS” and the message “REMOVE FILTERS & CLEAN
IN SOLUTION... PUSH ICON TO RESET” will scroll from right to left
on the bottom line of the display. To reset this message, push the
Dimension One Spas Icon (logo) pad located at the right hand side of the
control.
CHANGE WATER
Every four months the top line of your LCD will read “CHANGE
WATER” and the message “TURN POWER OFF---DRAIN & REFILL
SPA...PUSH ICON TO RESET” will scroll from right to left on the bot-
tom line of the display. To reset this message, push the Dimension One
Spas Icon located at the right side of the control panel.
ULTRAVISION
When “ULTRAVISION” is displayed on the LCD, the system is telling
you that it has been six months since you started up your spa. If you are
using an UltraVision cartridge, we recommend that you replace it at this
time. Push the Dimension One Spas icon to reset the system. If you do