29
1998
O
w
n
er
’
s
Ma
n
ual
desired filter cycle length appears in the LCD, push the PROGRAM pad
to select it. The pre-set factory default is 60 minutes.
NUMBER OF FILTER CYCLES
After setting the length of the filter cycle, you will be prompted to set the
number of filter cycles. The top line of the LCD will read “SET # OF
CYCLES”. Push the UP or DOWN pad to toggle from 1 to 2 to 3 to 4
cycles per day. When your desired number of cycles appears on the LCD
push the PROGRAM pad to select it. The pre-set factory default is 2
cycles per day.
CAUTION: Long and/or numerous filter cycles could cause overheating
of the spa - especially in hot climates.
PUMP RUN TIME
After setting the number of filter cycles, the top line of the LCD will
read “PUMP RUN TIME”. Push the UP or DOWN pads to toggle from
30 to 45 to 60 minutes. This sets the length of time the pump will run
when a jets pad is pushed. For example, if you choose 45 minutes, each
time you push a jets pad, the pump will run for 45 minutes before shut-
ting down automatically.
LCD INVERT
The invert feature will flip the text on the LCD so it can be easily read
from both inside and outside the spa. To invert the text, simply push the
“enter” pad three times. To return the text to its original position, repeat
this process - push the “ENTER” pad three times.
CONTROL PANEL LOCK
To help prevent unauthorized use of the spa, the control panel may be
locked. When the control panel lock is engaged, all programmed or
default spa functions will operate normally but all control pads will not
operate. When the panel is locked, the top line of the LCD will display
the current spa temperature and the bottom line will display “ALL SPA
FUNCTIONS LOCKED”.
To lock the panel all the following pads must be pushed within 3 sec-
onds:
1) Push the ICON (logo) pad.