28
1998
O
w
n
er
’
s
Ma
n
ual
spa programming, the spa will automatically exit the programming
sequence and revert to the pre-set factory default settings.
To initiate the programming sequence at any time, push the PROGRAM
pad. To exit the programming sequence at any time, push the ENTER
pad.
SETTING THE TIME
Upon power initiation, or after pushing the PROGRAM pad, the top line
of the LCD will read “SET CLOCK”. Push the UP or DOWN pads to
engage the clock, push them again to start the time-setting cycle, and
push either pad a third time to stop the time-setting cycle. After pushing
either pad once, the time will advance or decrease automatically in one
minute increments. (The time will change one minute every second for
the first 10 seconds, and then start advancing or decreasing very rapidly.)
After reaching the correct time, push the UPor DOWN pad again to set
the time or make further adjustments. The pre-set factory default is 11:59
a.m. Pushing the PROGRAM pad will set the time and exit the time-set-
ting mode. You will then be prompted to set the filter start time.
FILTER START TIME
After setting the time-of-day, the top line of the LCD will read “SET
FILTER TIME”. Push the UP or DOWN pads to engage the clock and
push them again to set the time that the first filter cycle will start. When
your desired filter cycle start time is set in the LCD display, push the
PROGRAM pad to continue. The pre-set factory default is 12:00 p.m. to
1:00 p.m. repeating every 12 hours unless the number of filter cycles per
day has been changed. During a filter cycle, the bottom line of the LCD
will read “SPA FILTERING---JETS1 ACTIVATED”. During the filter
cycle, JETS 1 will activate, the first 5 minutes at high speed and the
remainder of the filter cycle time at low speed.
FILTER CYCLE DURATION
After setting the filter cycle start time, the top line of the LCD will read
“CYCLE DURATION”. Push the UP or DOWN pads to toggle from 60
to 90 to 120 to 150 to 180 minutes. The first 5 minutes of the filter cycle
will be at high speed and the remaining time at low speed. When your