30
1998
O
w
n
er
’
s
Ma
n
ual
2) Push the ICON (logo) pad.
3) Push the ENTER pad.
To unlock the panel: All the following pads must be pushed within 3 sec-
onds:
1) Push the ENTER pad.
2) Push the ENTER pad.
3) Push the ICON (logo) pad.
When the last pad is pushed all pads will be active.
PROGRAMMING LOCK
The programming lock is to prevent unauthorized programming and
water temperature adjustments. When the programming lock is engaged,
all programmed or default functions will operate normally. Also, the spa
user may operate the pumps, the spa light or view the time-of-day, but no
programming changes may be made.
To enable the programming lock, all the following pads must be pushed
within 3 seconds:
1) Push the ICON (logo) pad.
2) Push the ICON (logo) pad.
3) Push the PROGRAM pad.
To Unlock the Panel: All the following pads must be pushed within 3 sec-
onds:
1) Push the ENTER pad.
2) Push the ENTER pad.
3) Push the ICON (logo) pad.
When the last pad is pushed all pads will be active.
CONTROL PANEL RESET
This function is used to completely reset the clock and all other system
variables to the factory defaults. Please keep in mind that this resets all
maintenance messages (clean filters, change water, etc.) as if the spa is
being installed the day of the panel reset.
To reset the control system all of the following pads must be pushed
within 3 seconds:
1) Push the ICON (logo) pad