DirecTV D10-200 manual Connection option E, Chapter, Setting up and connecting

2 CHAPTER 2

Setting up and connecting

Connection option E:

DIRECTV Receiver to TV and A/V receiver

If connection option E best matches your needs, follow these steps:

1 Make sure your TV, A/V receiver, and DIRECTV Receiver are turned off and unplugged.

Connect the RG-6 coaxial cable running from your satellite dish to the SATELLITE IN jack on

2 the back of your DIRECTV Receiver.

Connect the coaxial cable running from your cable TV system or off-air TV antenna to the

3 OFF-AIR IN jack on the back of the DIRECTV Receiver.

Connect the supplied phone cord to a telephone wall jack and to the Phone Line jack on the

4 back of the DIRECTV Receiver.

Matching like colors, connect the supplied A/V cable to the AUDIO OUT and VIDEO OUT

5 jacks on the back of the DIRECTV Receiver.

Connect the other ends of the A/V cables to appropriate audio and video input jacks on your

6 A/V receiver. Be sure to connect the outputs on the DIRECTV Receiver to corresponding inputs on your A/V receiver (video out to video in, left audio out to left audio in, right audio out to right audio in).

Connect another set of A/V cables (not included) to the second set of audio and video output

7 jacks on the back of the DIRECTV Receiver.

Connect the other ends of these A/V cables to the appropriate audio and video input jacks

8 on your TV. Be sure to connect the outputs on the DIRECTV Receiver to corresponding inputs on your TV.

(Optional) if your TV and A/V receiver both have S-Video jacks, you can also make the

9 S-Video connections shown in the illustration. This step is optional; it provides improved picture quality.

10 Plug in the power cords for your TV, A/V receiver, and DIRECTV Receiver.

2 CHAPTER 2

Setting up and connecting

To watch DIRECTV® programming

Set your A/V receiver and TV to the appropriate input mode. See the manuals for your A/V receiver and TV for instructions.)

DIRECTV Receiver

A/V Receiver

TV

30 31