Page 105

Updates

Updates

Your satellite receiver is set to turn itself off at 3:00 a.m. so that it can receive
updates to the Program Guide and DISH On Demand (when available). To
change the update time, complete the following:
1. Press the MENU-8-5 to open the Updates screen.
2. Highlight the Activation option.
3. Use the UP and DOWN ARROW buttons to select Enable or Disable.
Note: If you disable this feature, no new Program Guide or DISH On
Demand information will be available until the receiver is turned off.
4. Highlight the Time Set option.
5. Use the NUMBER PAD buttons or the UP and DOWN ARROW buttons
to set the time.
6. Highlight the AM/PM option.
7. Use the UP and DOWN ARROW buttons to select AM or PM.
8. Select Done to save the changes and exit this screen.
Note: You can reset the changes you have made to the Updates feature by
selecting Defaults before exiting this screen.