Chapter 3
Page 114
Using the System

VCR Buttons

• Press the BACK button to rewind a videotape.
• Press the PAUSE button to pause a videotape. Press this
button or the PLAY button to go back to playing the tape.
• Press the FWD button to forward a videotape.
• Press the STOP button to stop playing or recording on a
videotape.
• Press the RECORD button to record on a videotape.
• Press the PLAY button to play or to go back to playing a
videotape.

Number Buttons

Use the NUMBER buttons to enter channel numbers.
Note: If you are using the remote control in limited mode, the VCR will not
change channels.

Control a Tuner or Amplifier

Only the buttons described here control a tuner or amplifier. Some of the buttons
described here may not control your tuner or amplifier. Please see the user’s
manual that came with your tuner or amplifier for more information.

AUX Mode Button

You must first set up the remote to control the device. See Set Up the Remote to
Control Devices, beginning on page 107. Then, you must press the AUX mode
button to set the remote to AUX mode. The AUX mode button flashes once to
show you’ve set the remote to AUX mode. Make sure you keep the remote in
AUX mode to use the buttons described here.