12.0 375 125 DIA 125 SQ 625 | DKS Enterprises 1810, 1803, 1808, 1802

1.1.6 Flush Mount Surface Mounting Kit (use with 1803 and 1810 units only)

Flush mount units can be surface mounted by using the optional 1814-152 surface mount trim ring. Flush mount units are not designed for direct exposure to the weather. Be sure that the unit is securely mounted and is not subject to vibration from closing doors or gates.

CAUTON! If this entry system is used to control a vehicular gate with an automatic gate operator, the entry system must be mounted a minimum of ten (10) feet away from the gate and gate operator, or in such a way that a person cannot operate the entry system and touch the gate or gate operator at the same time.

	12.0
1.0
.375
				1 3 . 5
	9.0
	7.5			5
	6.0	. 3 7 5	. 8 7 5	1 . 1 2
		3.0
1.125 DIA	1.125 SQ

2.625

1814- 152	Flush Mount
Trim Ring	Entry System

15

Image 15

DKS Enterprises 1810, 1803, 1808, 1802 owner manual 12.0 375 125 DIA 125 SQ 625

Contents

1802, 1803, 1808, 1810 Telephone Entry Systems Page Use this manual with the following models only Table of Contents Maintenance and Trouble Shooting Listing Important Notice General Information Features Installation Guidelines ALL Systems Installation Surface Mount 1803 and 1810 Units Surface Mount 1803 and 1810 Units with Recess Box Flush Mount 1803 and 1810 Units Flush Mount Rough-in Box applies to 1803 and 1810 only Flush Mount Trim Ring use with 1803 and 1810 units only 12.0 375 125 DIA 125 SQ 625 7 1802 Surface Mount Only 8 1808 Surface Mount Only Memory Chip Installation Postal Lock Installation Page Wiring 18AWG Terminal Description Main Terminal Description Wiring Description Controlling a Single Door or Gate Relay Wiring Typical Controlling a Gate Operator and Pedestrian Gate or Door Programming from the Keypad Programming from an Offsite LocationProgramming Notes Relay Strike Time General ProgrammingMaster Code Single or Multiple Systems Tone Open Numbers Talk Time Postal Switch Touch-tone / Rotary-dialNumber of Rings to Answer Star * Key Function Keypad Function Phone Number Programming Programming the Directory Code LengthProgramming 7-digit Phone Numbers Programming Area Codes Programming Phone Numbers with Area Code ReferenceDeleting Individual Phone Numbers Delete All Phone Numbers Display / Delete Phone NumbersDisplay Phone Numbers with known Directory Codes Delete All Four-Digit Entry Codes Entry Code ProgrammingFour-Digit Entry Code Programming Delete Four-Digit Entry Codes Five-Digit Entry Code Divide Number Five-Digit Entry Code ProgrammingDelete Five-Digit Entry Codes Delete All Five-Digit Entry Codes Time Functions Programming Time Clock ProgrammingAutomatic Relay Activation Time Zones Five-Digit Entry Code Time Zone Four-Digit Entry Code Time Zone Flash Entry Codes Relay 2 Terminals Display Contrast 1802, 1803, 1810 only Speaker VolumeFeedback Click Sensitivity Master Code Switch Ring PinHandset / Hands Free Responding to a Guest Call Using an Entry CodeGeneral Instructions Guest Instructions Relay Check System AdministratorRemote Programming Remote Relay Activation Auto Relay Time Zone Enable / Disable Entry Code Time Zone Enable / Disable Switch Input Operation Miscellaneous Operating InstructionsLine Sharing Areas with 10-digit Dialing Connection to a PBXPage Trouble Shooting Maintenance Sympton Possible Solutions Accessories LOG Tables Name Phone Number Directory Code Entry Alternate Area Code Name Phone Number Directory Code Entry Alternate Area Code Resident Instruction Sheet