SYMPTON |
| POSSIBLE SOLUTION(S) |
|
|
|
• | Forgetting to press # first. | |
will not work. | • | Entry code is time zone restricted. Reprogram time zone or turn time zone off |
| ||
|
| (5.2.4). |
| • | Entry code attempted was a flash code that is no longer valid. |
• | Forgetting to press ## first. | |
will not work. | • | Entry code is time zone restricted. Reprogram time zone or turn time zone off |
| ||
|
| (5.2.4). |
Entry codes will not | • | Programmed entry codes are greater than the divide number. Reprogram |
activate relay 1. |
| divide number or program entry codes less than the divide number. |
|
|
|
Entry codes will not | • | Programmed entry codes are less than or equal to the divide number. |
activate relay 2. |
| Reprogram divide number or program entry codes greater than the divide |
|
| number |
System emits a beep | • | Master code switch is in the ON position. |
every 30 seconds. |
|
|
|
|
|
LCD is unreadable | • | Adjust contrast. |
(1802, 1803, 1810 |
|
|
units only). |
|
|
|
|
|
6.2 ACCESSORIES
Surface Trim Ring | Use to recess surface mount 1803 or 1810 units into a wall or column. |
| P/N |
Flush Kit | Use to install flush style 1803 or 1810 units into a wall or column. Kit |
| includes rough in back box and trim ring. P/N |
| stainless steel trim ring. P/N |
Flush Ring | Use to surface mount a flush style 1803 or 1810 unit. P/N |
Stainless Steel Case | Replaces the black steel surface mount case on the 1803 and 1810 units |
| with a stainless steel case. P/N |
Surge Suppressers | High voltage (120 V) suppresser: P/N |
| Phone line suppresser: P/N |
| Low voltage (28 V) suppresser: P/N |
Mounting Post | Standard gooseneck mounting post: P/N |
| Standard gooseneck mounting post – long: P/N |
| |
| |
Telephone Test Set | Includes clips, cord and carrying case. P/N |
Battery | 12 volt .8 amp hour gel cell provides stand by power during power |
| interruptions. P/N |
51
