8 1808 Surface Mount Only | DKS Enterprises 1803, 1802, 1810

1.1.8 1808 Surface Mount Only

Surface mount units can be mounted directly to a wall or pilaster, or can be post mounted using a DoorKing mounting post (p/n 1200-045 and 1200-046). Be sure the unit is mounted securely and is not subject to vibration from closing doors or gates.

CAUTON! If this entry system is used to control a vehicular gate with an automatic gate operator, the entry system must be mounted a minimum of ten (10) feet away from the gate and gate operator, or in such a way that a person cannot operate the entry system and touch the gate or gate operator at the same time.

3.50

.875

3.50

3.0

.875

6.375

7 . 3 7 5

3.375

2 . 6 2 5

17

Image 17

DKS Enterprises 1803, 1802, 1810 owner manual 8 1808 Surface Mount Only

Contents

1802, 1803, 1808, 1810 Telephone Entry Systems Page Use this manual with the following models only Table of Contents Maintenance and Trouble Shooting Listing Important Notice General Information Features Installation Guidelines ALL Systems Installation Surface Mount 1803 and 1810 Units Surface Mount 1803 and 1810 Units with Recess Box Flush Mount 1803 and 1810 Units Flush Mount Rough-in Box applies to 1803 and 1810 only Flush Mount Trim Ring use with 1803 and 1810 units only 12.0 375 125 DIA 125 SQ 625 7 1802 Surface Mount Only 8 1808 Surface Mount Only Memory Chip Installation Postal Lock Installation Page Wiring 18AWG Terminal Description Main Terminal Description Wiring Description Controlling a Single Door or Gate Relay Wiring Typical Controlling a Gate Operator and Pedestrian Gate or Door Programming Notes Programming from the KeypadProgramming from an Offsite Location Master Code General ProgrammingSingle or Multiple Systems Relay Strike Time Tone Open Numbers Talk Time Number of Rings to Answer Postal SwitchTouch-tone / Rotary-dial Star * Key Function Keypad Function Programming 7-digit Phone Numbers Phone Number ProgrammingProgramming the Directory Code Length Deleting Individual Phone Numbers Programming Area CodesProgramming Phone Numbers with Area Code Reference Display Phone Numbers with known Directory Codes Delete All Phone NumbersDisplay / Delete Phone Numbers Four-Digit Entry Code Programming Entry Code ProgrammingDelete Four-Digit Entry Codes Delete All Four-Digit Entry Codes Delete Five-Digit Entry Codes Five-Digit Entry Code ProgrammingDelete All Five-Digit Entry Codes Five-Digit Entry Code Divide Number Automatic Relay Activation Time Zones Time Functions ProgrammingTime Clock Programming Five-Digit Entry Code Time Zone Four-Digit Entry Code Time Zone Flash Entry Codes Relay 2 Terminals Feedback Speaker VolumeClick Sensitivity Display Contrast 1802, 1803, 1810 only Handset / Hands Free Master Code SwitchRing Pin General Instructions Using an Entry CodeGuest Instructions Responding to a Guest Call Remote Programming System AdministratorRemote Relay Activation Relay Check Auto Relay Time Zone Enable / Disable Entry Code Time Zone Enable / Disable Line Sharing Switch Input OperationMiscellaneous Operating Instructions Areas with 10-digit Dialing Connection to a PBXPage Trouble Shooting Maintenance Sympton Possible Solutions Accessories LOG Tables Name Phone Number Directory Code Entry Alternate Area Code Name Phone Number Directory Code Entry Alternate Area Code Resident Instruction Sheet