Keypad Function, Star * Key Function | DKS Enterprises 1810, 1803

3.1.9 Keypad Function

This programming sequence sets the function of the 0 through 9, and the # keys on the keypad during conversation. The keys can be set to hang-up the entry system when they are pressed during conversation, or they can be programmed to DTMF tone out during conversation. The later may be desirable if the entry system is used with an auto-attendant type telephone system where the caller is prompted to enter numbers from a touch-tone telephone. HINT: If DTMF tones are required, program the # or * key to hang-up the system.

1.Press and enter the four-digit MASTER CODE BBBB(beep).

2.Enter the desired key number Bthen press (beep).

3.

Press

(beep) for hang-up, or press (beep) for touch-tone.

4.Repeat steps 3 and 4 to program other keys.

5.Press TOGETHER to end this programming step (beeeeeep).

3.1.10 Star (*) Key Function

This programming sequence sets the function of the key on the keypad during conversation. This key can be set to hang-up the entry system when pressed during conversation, or it can be programmed to touch-tone out during conversation.

1.Press and enter the four-digit MASTER CODE BBBB(beep).

2.

Press

(beep) for hang-up, or press (beep) for touch-tone.

3.Press TOGETHER to end this programming step (beeeeeep).

31

Image 31

DKS Enterprises 1810, 1803, 1808, 1802 owner manual Keypad Function, Star * Key Function

Contents

1802, 1803, 1808, 1810 Telephone Entry Systems Page Use this manual with the following models only Table of Contents Maintenance and Trouble Shooting Listing Important Notice General Information Features Installation Guidelines ALL Systems Installation Surface Mount 1803 and 1810 Units Surface Mount 1803 and 1810 Units with Recess Box Flush Mount 1803 and 1810 Units Flush Mount Rough-in Box applies to 1803 and 1810 only Flush Mount Trim Ring use with 1803 and 1810 units only 12.0 375 125 DIA 125 SQ 625 7 1802 Surface Mount Only 8 1808 Surface Mount Only Memory Chip Installation Postal Lock Installation Page Wiring 18AWG Terminal Description Main Terminal Description Wiring Description Controlling a Single Door or Gate Relay Wiring Typical Controlling a Gate Operator and Pedestrian Gate or Door Programming from an Offsite Location Programming from the KeypadProgramming Notes Relay Strike Time General ProgrammingMaster Code Single or Multiple Systems Tone Open Numbers Talk Time Touch-tone / Rotary-dial Postal SwitchNumber of Rings to Answer Star * Key Function Keypad Function Programming the Directory Code Length Phone Number ProgrammingProgramming 7-digit Phone Numbers Programming Phone Numbers with Area Code Reference Programming Area CodesDeleting Individual Phone Numbers Display / Delete Phone Numbers Delete All Phone NumbersDisplay Phone Numbers with known Directory Codes Delete All Four-Digit Entry Codes Entry Code ProgrammingFour-Digit Entry Code Programming Delete Four-Digit Entry Codes Five-Digit Entry Code Divide Number Five-Digit Entry Code ProgrammingDelete Five-Digit Entry Codes Delete All Five-Digit Entry Codes Time Clock Programming Time Functions ProgrammingAutomatic Relay Activation Time Zones Five-Digit Entry Code Time Zone Four-Digit Entry Code Time Zone Flash Entry Codes Relay 2 Terminals Display Contrast 1802, 1803, 1810 only Speaker VolumeFeedback Click Sensitivity Ring Pin Master Code SwitchHandset / Hands Free Responding to a Guest Call Using an Entry CodeGeneral Instructions Guest Instructions Relay Check System AdministratorRemote Programming Remote Relay Activation Auto Relay Time Zone Enable / Disable Entry Code Time Zone Enable / Disable Miscellaneous Operating Instructions Switch Input OperationLine Sharing Areas with 10-digit Dialing Connection to a PBXPage Trouble Shooting Maintenance Sympton Possible Solutions Accessories LOG Tables Name Phone Number Directory Code Entry Alternate Area Code Name Phone Number Directory Code Entry Alternate Area Code Resident Instruction Sheet