3.4.3 Four-Digit Entry Code Time Zone

This programming sequence sets up a time zone for the four-digit entry codes. This time zone uses a range of four-digit entry codes and can be programmed for certain days of the week. This time zone can be turned on and turned off after it is programmed (see operating instructions 5.2.4).

1.Press ￿and enter the four-digit MASTER CODE BBBB(beep).

2.Press ￿￿(beep) to turn the time zone ON, or press ￿￿(beep) to turn the time zone OFF.

3.Enter the beginning hour and minutes BBBBthen press ￿(beep). (Four-digit entry codes that are within the boundaries of the time zone will begin to work at this time.)

4.Press ￿￿(beep) for AM, or press ￿￿(beep) for PM.

5.Enter the ending hour and minutes BBBBthen press ￿(beep). (Four-digit entry codes that are within the boundaries of the time zone will cease to work at this time.)

6.Press ￿￿(beep) for AM, or press ￿￿(beep) for PM.

7.Enter the days of the week BBBBBBBthen press ￿(beep). To skip any days of the week, enter # in place of the day. For example, to have a time zone active on Saturday and Sunday only (Sun = 1, Sat = 7), enter 1 7 # # # # #.

8.

Enter the lower four-digit boundary

then press (beep).

9.Enter the upper four-digit boundaryBBBBthen press ￿(beep).

10.Press ￿￿TOGETHER to end this programming step (beeeeeep).

3.4.4 Five-Digit Entry Code Time Zone

This programming sequence sets up a time zone for the five-digit entry codes. This time zone uses a range of five-digit entry codes and can be programmed for certain days of the week. This time zone can be turned on and turned off after it is programmed (see operating instructions 5.2.4).

1.Press ￿and enter the four-digit MASTER CODE BBBB(beep).

2.Press ￿￿(beep) to turn the time zone ON, or press ￿￿(beep) to turn the time zone OFF.

3.Enter the beginning hour and minutes BBBBthen press ￿(beep). (Five-digit entry codes that are within the boundaries of the time zone will begin to work at this time.)

4.Press ￿￿(beep) for AM, or press ￿￿(beep) for PM.

5.Enter the ending hour and minutes BBBBthen press ￿(beep). (Five-digit entry codes that are within the boundaries of the time zone will cease to work at this time.)

6.Press ￿￿(beep) for AM, or press ￿￿(beep) for PM.

7.Enter the days of the week BBBBBBBthen press ￿(beep). To skip any days of the week, enter # in place of the day. For example, to have a time zone active on Saturday and Sunday only (Sun = 1, Sat = 7), enter 1 7 # # # # #.

8.

Enter the lower five-digit boundary

then press (beep).

9.Enter the upper five-digit boundaryBBBBBthen press ￿(beep).

10.Press ￿￿TOGETHER to end this programming step (beeeeeep).

38

Page 38
Image 38
DKS Enterprises 1802, 1803, 1808, 1810 owner manual Four-Digit Entry Code Time Zone, Five-Digit Entry Code Time Zone