DMP Electronics SCS-1R manual Model SCS-208Power Cable, Model SCS-203Convenience Panel, Host Cable

Installation

Model SCS-208 Power Cable

Description

The SCS-208 is a 2-foot cable that connects the different system voltages between the SCS-130 Transformer Card J3 and SCS-120 Multibus Power Supply Card J3.

Installation

The SCS-208 cable can be used in either direction, but is polarized on each end for proper installation to the J3 connectors.

Model SCS-203 Convenience Panel

Description

The SCS-203 provides cabling for three RS-232 ports for the host output, auxiliary port (used for Remote Link programming), and an activity log printer.

Installation

1)Install the metal plate with the three 25-pin RS-232 connectors on the SCS-1R Receiver backplate using the two 6-32 x 1/4” screws provided.

2)Install the three 10-pin flat cable connectors to the SCS-150 Receiver ports A1, A2, and A3.

a)Connect the ribbon cable marked A1(Activity Log) to port A1.

b)Connect the ribbon cable marked A2(Aux) to port A2.

c)Connect the ribbon cable marked A3 (Host Output) to port A3.

3)Connect the printer using a DMP Model 389 Printer Cable and host computer using a DMP model SCS-204 Host Cable (see below) to the appropriate RS-232 connectors.

Model SCS-204 Host Cable

Description

The SCS-204 is a 10-foot RS-232 cable that connects a host computer to the SCS-1R Receiver.

Installation

Connect the SCS-204 cable from a host computer to the SCS-203 Convenience Panel center connector marked “HOST OUTPUT”.

THE END OF THE CABLE MARKED “HOST” MUST BE INSTALLED ONTO THE HOST COMPUTER.

Host Cable

If you are using a cable different from the SCS-204, be sure the cable pin out matches the drawing below.

PIN
1			SHIELD
2	RXD		2 (3)
3	TXD		3 (2)
			Connect to
4			HOST
			COMPUTER
5			(DTE)
7		SIGNAL GROUND	7 (5)
8
MALE			DB-25
DB-25			(DB-9)

SCS-1R Printer Cable

Printer Cable Pinout

Note: UL central station applications must use a serial printer that is listed for Fire Protective Signaling Systems.

To Okidata

Printer

Digital Monitoring Products SCS-1R Installation Guide

14