Dolby Laboratories Digital-Satellite-Receiver manual Menu/OSD language

(Fig. 5-2)

(Fig. 5-3)

(Fig. 5-4)

(Fig. 5-5)

(Fig. 5-6)

The initial installation procedure described hereinserves only as an example. The exact initial installation procedure will depend on the settings you wish to make.

Please follow closely any instructions that appear on the screen.

Menu/OSD language:

>Press OK to display the selection window for the

Menu/OSD language. (Fig. 5-2)

>Use the arrow keys up/down to select the prefer- red OSD language.

>Confirm by pressing OK.

Audio language

>Use the arrow keys up/down to select the prefer- red audio channel language. (Fig. 5-3)

When the installation assistant has been completed, your language selection here will be used to sort the programmes in your Favourites list.

>Confirm by pressing OK.

Country/Time Zone

>Use the arrow keys up/down to select the time zone of the country in which you are located. (Fig. 5-4)The time on the receiver clock will be set automatically based on your selection.

>Press OK to confirm, and to proceed to the antenna configuration.

Antenna configuration

In this step of the installation procedure you can adjust the setting of your digital receiver to the configuration of your antenna.

>If you wish to accept the standard antenna setting, use the arrow keys up/down to mark the field Standard and confirm by pressing OK. (Fig. 5-5)In this case, proceed to the next item, “Software Update”.

>If the configuration of your receiving installation does not correspond with the standard setting, mark the field Manual and confirm by pressing OK.

DiSEqC

>If you are utilising DiSEqC components as part of your reception installation, click on to the field Activate and confirm by pressing OK

(Fig. 5-6).(Additional information on DiSEqC may be found in Chapter 10: Technical Terms.)

14