Dolby Laboratories Digital-Satellite-Receiver manual Volume control, Smartcard PIN-Code

(Fig. 7-10)

*Only for receivers equipped with this feature

7.3.1.3 Smartcard PIN-Code*

Your digital receiver is equipped with a parental control func- tion that allows you to block individual programmes as well as access to the main menu (see Points 6.2.1 and 8.1.6).

In addition programmes not suitable for viewing by children are pre-blocked by means of an age group code. This paren- tal control for programmes is permanently active, and cannot be de-activated as described in Point 8.1.6. To unblock a par- ticular programme, you must enter the Smartcard PIN code. This PIN code is stored on the Smartcard. You will receive it when you receive the card.

The Smartcard PIN code is thus not the same as the Receiver PIN code of the digital receiver (Point 8.2) and should not be confused with this.

As soon as you have inserted a Smartcard in the card reader slot, only the Smartcard PIN code will be active.

If you switch to a channel currently broadcasting a pre-blok- ked programme, or if you attempt to call up the main menu, a message will be displayed. (Fig. 7-10)

>To view the programme, or to call up the main menu, use the numeric keys to enter the 4-digit

Smartcard PIN code.

>As soon as the correct code has been entered, you will be able to view the programme or to access the main menu.

If the PIN code has been entered incorrectly, you can repeat the entry, or you can exit the menu by pressing

Back.

7.3.1.4 Changing the Smartcard PIN code*

Should it become necessary to change the Smartcard PIN code, please contact the appropriate Hotline.

7.4 Volume control

You have the facility to adjust the volume of your digital recei- ver. This makes operating the receiver even more convenient, since you can access all important functions from a single remote control, and will rarely have to use the remote control of your television set. When the digital receiver is switched on it will reproduce sound at the volume level last set.

>Adjust the volume of your digital receiver using the Volume + key to increase volume, and the Volume - key to make it softer.

>Press the Sound on/off key to switch the sound off (mute), press the same key again to switch the sound back on.

28