Dolby Laboratories Digital-Satellite-Receiver manual Changing the receiver PIN code

8.2 Changing the receiver PIN code

The receiver PIN code is set at the factory to 0000. To change the receiver PIN code proceed as follows:

>Use the Menu key to call up the Main Menu.

>Use the arrow keys up/down to mark the line

Settings.

>Confirm by pressing OK.

The sub-menu Settings will be displayed.

>Use the arrow keys up/down to mark the line

Change Receiver PIN.

>Confirm by pressing OK.

>Use the numeric keys to enter the current receiver PIN code (Default setting 0000) (Fig. 8-7).

>Use the numeric keys to enter the desired new receiver PIN code.

>Repeat the entry of the code.

>When you have changed the receiver PIN code as described here, press the Menu key to return to nor-

mal operation.

Note! Ensure that you do not forget the receiver PIN code. If you do forget it, please consult your specialist retailer!

8.3 Searching for programmes

As mentioned previously, your digital receiver is pre-pro- grammed for reception of the ASTRA and EUTELSAT satelli- tes. To receive new programmes, or programmes broadcast by other satellites, there are various options of conducting a programme search.

1. Automatic Search

Select this type of search to scan all satellites selected in the menu LNC Settings (Point 6.4 and 8.4) for programmes.

2. Satellite Search

Select this type of search to search only a specific satellite for programmes.

3. Transponder Search

Select this type of search to scan a specific transponder on a satelite.

4. Manual Search

Select this type of search if you want to search for a specific programme using programme-specific PID numbers.

When the search has been completed, a message will be displayed on your screen indicating how many programmes your digital receiver has found, how many of these are new, and how many programmes are encrypted. New programmes are stored in the Complete list, and can be transferred to the Favourites list as described in Point 8.1.

(Fig. 8-7)

(Fig. 8-8)

45