(Fig.
*Only for receivers equipped with this feature
To enjoy this feature, you must simply connect the Audio Out Digital output (see Point 4.5.2) of your DVB receivers with the digital input of your Dolby Digital 5.1 channel amplifier.
Where a programme is broadcast in Dolby Digital sound, this will be indicated by the Dolby logo being displayed in the information window when the programme is selected. If the function Dolby Digital (AC3) is switched on, these program- mes will automatically be reproduced in Dolby Digital format. If the function is not enabled, Dolby Digital sound can also be switched on manually. Please refer to Point 7.5.1 of this ope- rating manual.
6.3.7 UHF output channel*
To set a suitable UHF output channel, proceed as follows:
>Select a free UHF channel in the range of 21 to 69 on your television set.
>Then, using the arrow keys right/left set the new output channel of your digital receiver. The digital receiver will now transmit on the UHF channel indica- ted on the display. If you are not able to obtain interfe-
>When you have found an optimum UHF channel, remember to store this in the memory of your televi- sion set.
>If your television set is equipped only with an automa- tic programme scan, you will first have to set a random UHF channel on your digital receiver, and then start the automatic scan function of your television set. If necessary, repeat this procedure until you have found a suitable channel, then store this in the memory of your television set.
>Finally, it may be necessary to perform some fine tuning of the channel on your television set.
6.4 Antenna configuration
Once you have completed setting the digital receiver to your individual preferences, you can proceed, if necessary, to adjust the digital receiver settings to your antenna. The menu Antenna Configuration contains the satellites that have been selected in the installation assistant. If the installation assistant was interrupted, the satellite positions ASTRA and EUTELSAT are
Should you wish to receive other satellites, or if you are using a different type of LNC, you can adjust your digital receiver to the appropriate data as follows:
>Press the Menu key to call up the Main Menu. (Fig.
>Use the arrow keys up/down to select the item
Settings.
20
