Manuals / Brands / TV and Video / Satellite TV System / Dolby Laboratories / TV and Video / Satellite TV System

Dolby Laboratories Digital-Satellite-Receiver 7.14.7.2 Marking a programme, 7.14.7.3 Recording a programme (Timer operation)

1 66

Download 66 pages, 4.36 Mb

> Press the SFI key to display the information.

Lengthy text passages can be scrolled one line at a

time by using the arrow keys up/down or use the

green or red function keys to move backward or

forward one page at a time.

> Press Back to return to the previous table.

7.14.7.2 Marking a programme

> Use the arrow keys or the function keys to

mark/pre-select the desired .

> Confirm by pressing OK. The programme will be

automatically marked, and will be selected when the

broadcast begins.

> Press Back to return to the previous table.

7.14.7.3 Recording a programme (Timer operation)

The function Record serves to switch your digital receiver on

and off for the selected programme, so that this can be recor-

ded even in your absence. Please note that you must also

programme your video recorder to make a recording.

> Use the arrow keys to mark the desired program-

me.

> Press the OK key twice to highlight the line in red

and to accept the data for this programme directly into

the timer memory.

or

> Press the red function key (Timer/VCR) to open a

selection window.

> Use the arrow keys up/down to mark the line

Record.

> Confirm by pressing OK.

The timer menu showing the data of the selected pro-

gramme will be displayed for monitoring purposes. If

necessary, you can make alterations or corrections at

this stage (see 7.15).

> Press Back to return to the previous table.

The appropriate line will be highlighted in red. Your

receiver will be switched on at the starting time of the

programme selected. If the unit was switched on by

means of the timer, this will be indicated by “rEc” in

the display*. Most of the functions of the remote con-

trol are disabled at this stage to avoid any accidental

interruption of the recording.

In standby mode the active timer will be indicated by

the blinking of the colon in the time display.

35

* Only for receivers equipped with

this feature

bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:14 Seite 35

Contents

Main 1 Index Page Page 2 Illustrations Remote control Page Page 3 Please read this first Important notes on operation Note on disposal Safety notes When not in use Connecting the DVB receiver to a satellite installation VCR Analogue Receiver 4 Connections 4.1 Mains power connection 4.2 External unit 4.2.1 Single operation 4.2.2 Operation with an additional receiver in a sin- gle-receiver installation 4.4 Video cassette recorder (VCR) 4.5 Hi-fi amplifier 4.5.1 Analogue (Fig. 5-1) 4.5.2 Digital 5 Getting started: initial installation (Fig. 5-2) (Fig. 5-3) (Fig. 5-6). (Fig. 5-4) (Fig. 5-5) (Fig. 5-7) (Fig. 5-8) (Fig. 5-12). (Fig. 5-9) (Fig. 5-10) (Fig. 5- 14) (Fig. 5-15) 6 Settings 6.1 Menu language (Fig. 6-1) 6.2 Basic settings (Fig. 6-2) 6.3 Audio/Video settings (Fig. 6-4) (Fig. 6-5) 6.3.1 Picture format TV set 6.3.2 Language (Audio signal) 6.3.3 Language (Sub-titles) 6.3.4 TV SCART mode 6.3.5 Video system* 6.4 Antenna configuration 6-6) (Fig. 6-7) (Fig. 6-8) 6.4.1 Switching DiSEqC on or off 6.4.2 Setting the switching matrix 6.4.3 Additional Settings/LNC properties (Fig. 6- 9) 6.4.4 Rotating antenna 7 Operation 7.1 Switching on and off 7.2 Programme selection 7.2.1 Using the Programme up/down keys 7.2.2 Using the numeric keys 7.2.3 Using the programme list (Fig. 7-1) 7.2.4 Calling up blocked programmes (Fig. 7-4) 7.2.5 Information box 7.3 Reception of encrypted programmes* 7.3.1 Special functions* 7.3.1.1 Multifeed options* (Fig. 7-6) (Fig. 7-8) (Fig. 7-7) 7.3.1.2 Time management* 7.4 Volume control 7.5 Selecting a different language (Fig. 7-11) 7.5.1 Dolby Digital (AC3 mode) 7.6 TV/Radio switching 7.7 Return to last programme selected 7.8 Display time and programme information (Fig. 7-14) (Fig. 7-13) (Fig. 7-12) 7.12 Teletext 7.12.1 Using the teletext decoder of your television set 7-15) 7.12.2 Using the internal teletext decoder 7.13 Sub-titles 7.14 Electronic Programme Guide SFI 7.14.1 Downloading SFI data 7.14.2 Interrupting the download 7.14.3 Viewing the Electronic Programme Guide (Fig. 7-16) (Fig. 7-16). 7.14.4 Now (Table of current programme contents) 7.14.5 Next (Fig. 7-17) 7.14.6 More (Fig. 7-18) 7.14.7 SFI Functions 7.14.7.2 Marking a programme 7.14.7.3 Recording a programme (Timer operation) 7.14.7.4 SFI Programme overview (Fig. 7-19) (Fig. 7-20) 7.14.7.5 SFI overview by programme type (genre) (Fig. 7- 21) 7.15 Timer (Fig. 7-23) 7.15.1 Programming the Timer ( Fig. 7-24) Page 7.15.2 Changing timer programming 7.15.3 Deleting timer programming Note!!! 8 Changing the basic programming 8.1 Configuring the Favourites list 8.1.1 Calling up the Navigator 8-1) (Fig. 8-2) 8.1.2 Adding programmes to Favourites list (Fig. 8-4) 8.1.3 Deleting programmes 8.1.3.1 Removing (deleting) from the Favourites list (Fig. 8-5) 8.1.3.2 Deleting from the Complete list 8.1.4 Sorting programmes (Fig. 8-6) 8.1.5 Programming the electronic programme guide Please note: 8.1.6 Blocking programmes (Parental control) 8.2 Changing the receiver PIN code (Fig. 8-7). 8.3 Searching for programmes (Fig. 8-8) (Fig. 8-9) 8.3.1 Automatic Search (Fig. 8-10) 8.3.2 Satellite Search 8.3.3 Searching on a transponder (Fig. 8- 12) 8.3.4 Manual Search (Fig. 8-13) 8.3.5 After the Search (Fig. 8- 14) 8.4 Service settings 8-15) (Fig. 8-16) (Fig. 8-17) 8.4.1 Restore Factory Settings 8.4.3 SFI Channel (Fig. 8-18) (Fig. 8-19) 8.4.4 Updating Software (Fig. 8-20) 8.5 System configuration 8.6 Conditional Access* 9 Operation in conjunction with a rotating antenna (DiSEqC 1.2) (Fig. 9-3) (Fig. 9-1) (Fig. 9-2) 9.1 Eastern and Western limits 9.2 Geo-positioning (Fig. 9-9) 9.3 Setting the satellite position 9.3.1 Selecting a satellite position 9.3.1.1 Selecting a pre-programmed satellite position (Fig. 9-10) 9.3.1.2 Setting a user-defined satellite position (Fig. 9-11) 9.3.2 Adjusting the satellite antenna 9.3.2.1 Configuring the test transponder and LNC (Fig. 9-12) 9.3.2.2 Manual positioning of antenna 9.3.2.3 Automatic detail adjustment (Autofocus) 9.3.3 Storing a satellite position (Fig. 9-14) (Fig. 9-15) (Figs. 9-16 and 9-17) 9.4 Current satellite list 9.4.1 Selecting a satellite position 9.5 Deleting a satellite position 9.6 Reference position 10 Technical Terms 10-1) Page 11 Technical Data Page Page 12 Trouble-shooting guide bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:15 Seite 64 Problem Possible cause Solution 65 bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:15 Seite 65 For daily use Switching on and off Programme selection Using the programme up/down keys Using the numeric keys Using the programme list: