Proceed as follows:
dConnect the receiver (SCART socket TV) and the television set (SCART socket) by means of a SCART cable. If your television set is appropriately equipped, this will be switched automatically to AV, and thus to satellite reception, when the digital receiver is switched on.
4.3.2 On RF cables*
If your television set is not equipped with a SCART socket, the digital receiver must be connected to the antenna input of the television set. In this case, sound can only be reproduced in mono mode.
Proceed as follows:
eUse a suitable TV connection cable to connect the receiver (RF output) to the antenna input of the tele-
vision set.
fThe cable coming from the terrestrial antenna must be connected to the Terrestrial antenna input of the
digital receiver.
You must now set the television set to the output channel of the digital receiver. Select a free programme slot on the tele- vision set, and tune it to Channel 38 (if necessary, refer to the operating manual of the television set).
If you cannot obtain a clear picture on Channel 38, this chan- nel or a neighbouring channel may already be tuned to a channel being received via the antenna. You can confirm this by briefly removing the antenna cable from the Terrestral antenna input socket of the digital receiver. If you then temporarily receive a better picture, you should select a diffe- rent channel in the range of 21 to 69 for the digital receiver.
Setting the UHF output channel
To set an optimum UHF output channel, call up the menu Audio/Video Settings, as described in 6.3., and select the field UHF output channel. Then proceed as desribed under 6.3.7.
4.4 Video cassette recorder (VCR)
gConnect the video recorder to the SCART socket VCR. When set to Play, the video recorder will deliver a switching signal to the digital receiver. The video recorder signal will thus be provided automatically to
the TV set.
If your video recorder does not provide a switching sig- nal, press the key EXTERN to set your digital recei- ver to the external AV input. Press this key again to return to normal operation.
*Only for receivers equipped with this feature
12
