Dolby Laboratories DP570 Bass Management, Subwoofer Crossover , LFE Monitor Mode

Assigning Monitor System Configuration Settings
Dolby® DP570 Multichannel Audio Tool User’s Manual 61
•Ifnosubwooferisavailable,redirecttheLFEchanneltotheLeftandRightchannel
decoderoutputs.
Bass Management
Thisoptiondetermineshowlowfrequenciesaredirectedinthemonitorsystem.The
choicesarelistedinTable A ‐1.
Subwoofer Crossover
ThesettingfortheSubwooferCrossoverfrequencydependsonthecapabilityofthe
speakersfromwhichyouaredivertinglowfrequencies:80Hz,100Hz,or120Hz.Ifthose
speakersareparticularlysmall,choosethehighestfrequency,120Hz.Thisnotonly
producesbetterresponsefromyoursystem,butalsoprotectssmallspeakersfromdamage.
Recommendedcrossoverpointsarealsocommonlyprovidedinthedocumentationfrom
speakermanufacturers.
LFE Monitor Mode
ThissystemdetermineswhethertheunitmonitorsanLFEchannel.ThedefaultisAuto;
thismeansthattheunithandlestheLFEexactlylikeaconsumerdecoderdoes.Other
optionsare:On,thesystemalwaysplaysbackanyexistingLFEfromtheLFEoutput; and
Off,thesystemneverdoes.
FigureA‐3
Figure A-3 Bass Management Settings
Table A-1 Bass Management Options
Options
None
C/S/LFE→L/R
SRND/LFE→L/R
CNTR/LFE→L/R
CNTR/SRND→L/R
LFE→L/R
SURROUND→L/R
CENTER→L/R
L/C/R/S→SW
CNTR/SRND→SW
SURROUND→SW
CENTER→SW