Dolby Laboratories DP570 A.1.4 Choosing Back Surround Speakers, A.1.5 Emulator Reversion , A.1.6 Setting the Lt/Rt Gain, A.1.7 Configuring Dolby Pro Logic II

62 Dolby® DP570 Multichannel Audio Tool User’s Manual
Configuring a Monitor System
A.1.4 Choosing Back Surround Speakers
Thesettingrecordsthenumberofbacksurroundspeakersyouhaveinyourmonitoring
system.ThedefaultisNone.Ifthisnotcorrect,clickeither1or2.
A.1.5 Emulator Reversion
Thissettingisnotactiveinthecurrentversion.
A.1.6 Setting the Lt/Rt Gain
ThisisaninputtrimfortheseparateLt/Rt Input.Thedefaultvalueis0dB.Adjustitusing
thecontrolshowninFigure A‐4.
FigureA‐4
Figure A-4 Lt/Rt Gain Function
A.1.7 Configuring Dolby Pro Logic II
Foradiscussionofthesefeaturesandtheiruses,seeSection4.21.
TosetuptheDP570forDolby®ProLogic®II:
1. SelectamodebypressingoneofthebuttonsshowninFigureA‐5.Thedefaultis
Movie.
2. InMusicmode,usetheslidersshowninFigureA‐5toadjusttheCenterWidth val ue
andDimensionvalues.Thedefaultforbothis0.
FigureA‐5
Figure A-5 Pro Logic II Controls
Note: Movieistherecommendedmodeforprofessionalmonitoring.Thewiderangeof
possiblechoicesinMusicmodemakeittoocomplexandunpredictabletoemulate.