Dolby Laboratories DV2018 Effective range of the Remote, Operation of the remote may be unstable

Getting Started(continued)

Important:

Your remote control has been preprogrammed. If your remote controller does not work correctly, maybe the setting is wrong, please try the following steps.

1.Press and hold the “SET ” button, followed by the “DVD COMBO ” button at the same time until the indicator lights up.

2.Press 1, 4, 7 buttons one by one. As a response, the indicator of the remote control will twinkle twice, otherwise please repeat the above 2 steps.

Installing batteries

1 Slide the battery compartment cover in the direction of the arrow.

2 Install two "AAA" batteries matching the +/- polarities of the battery to the +/- marks inside the battery compartment.

3 Replace the compartment cover.

	Notes:
*	Do not try to recharge batteries they are not rechargeable.
*	Use only the size and type of batteries specified. Do not mix different
	types of batteries together or old batteries with fresh ones.

*When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries.

*Do not throw the batteries into a fire. Do not drop, dampen or disassemble the remote control. Dispose of used batteries in the specified manner.

Effective range of the Remote

			Notes:
		*	Aim the remote control at the remote sensor and press control buttons to
			operate.
		*	Operate the remote control within 30o angle on either side of the remote
			sensor, up to a distance of approx. 5 meters or 16 feet.
	*		When there is an obstacle between the TV/DVD and the transmitter, the
			transmitter may not operate.
5m
	*		When direct sunlight, and incandescent lamp, fluorescent lamp or any
			other strong light shines on the REMOTE SENSOR of the TV/DVD, the
			operation of the remote may be unstable.

6