Key Length | Choose the key length for the wireless card. The method you |
| choose here must be the same as the method set in the |
| connected AP. |
| The number you typed here should be the same as the number |
| set in the connected AP. According to the input method you |
| selected, the characters that you have to set will differ. |
| For 10/26 Hexadecimal digits: Type 10/26 hexadecimal |
| numbers in this field. |
| For 5/13 ASCII digits: Type 5/13 ASCII characters in this |
| field. |
Default Key | Specify the one which is the same as the setting in the |
| connected AP. |
Enable 802.1X | It will be available when you choose Open System. |
Authentication Config | Such button will be available after you check Enable 802.1X. |
| You have to type the same parameters as set in the connected |
| AP. Otherwise the connection will not be successful. |
20 | Vigor N61 User’s Guide |
