INPUT menu
INPUT
menu
From the INPUT menu, items shown in the table below can be performed.
Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table.
Item
Description
Using the ▲/▼ buttons switches the progress mode.
TV ó FILM ó TURN OFF
| • This function is performed only for an interlaced signal at |
PROGRESSIVE | the VIDEO or |
1080i@50/60 signal at the COMPONENT or HDMI input. |
•When TV or FILM is selected, the screen image will be sharp. FILM adapts to the
| Using the ▲/▼ buttons switches the noise reduction mode. |
| HIGH ó MID ó LOW |
VIDEO NR | • This function is performed only for the VIDEO or |
| input, and for 480i@60, 576i@50 or 1080i@50/60 signal at the |
| COMPONENT or HDMI input. |
•When this function is excessive, it may cause a certain degradation of the picture.
Using the ▲/▼ buttons switches the
STILL ó MOVIE ó TURN OFF
| • This function performs only at a VIDEO input of NTSC, and PAL. |
•MOVIE is the mode for images with a lot of motions like movies, and STILL is the mode for images with few motions or completely still ones like slides.
| Using the ▲/▼ buttons switches the mode for color space. |
| AUTO ó RGB ó SMPTE240 ó REC709 ó REC601 |
COLOR SPACE | • This item can be selected only for an RGB signal or a component |
| video signal (except 480i@60, 576i@50 and SCART RGB). |
•The AUTO mode automatically selects the optimum mode.
•The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO.
(continued on next page)
32
