OPTION menu
OPTION menu (continued)
Item |
| Description | |
| This item is to assign one of the following function to MY BUTTON | ||
| 1 and 2 on the remote control (6). | ||
| Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then | ||
| using the ▲/▼ buttons sets one of the following functions to the chosen button. | ||
| • RGB1: Sets port to RGB1. | ||
| • RGB2: Sets port to RGB2. | ||
| • HDMI: Sets port to HDMI. | ||
| • COMPONENT: Sets port to COMPONENT (Y, CB/PB, CR/PR). | ||
| • | ||
| • VIDEO: Sets port to VIDEO. | ||
| • INFORMATION: Displays the INPUT | ||
| NETWORK | ||
| • AUTO KEYSTONE | : Performs automatic keystone distortion | |
| correction (36). |
| |
MY BUTTON | • MY MEMORY: Loads one of adjustment data stored (29). | ||
When more than one data are saved, the adjustment changes every time | |||
| |||
| the MY BUTTON is pushed. | ||
| When no data is saved in memory, | ||
| the dialog "No saved data" appears. | ||
| When the current adjustment is not saved to | ||
| memory, the dialog as shown in the right appears. | ||
| If you want to keep the current adjustment, please press the ◄ button to | ||
| quit. Otherwise loading a data will overwrite the current adjusted condition. | ||
•ACTIVE IRIS: Changes the active iris mode.
•PICTURE MODE: Changes the PICTURE MODE (25).
•FILTER RESET: Displays the filter time reset confirmation dialogue (45).
•AV MUTE : Turns the picture and audio on/off.
•TEMPLATE: Makes the template pattern selected to the TEMPLATE item (43) appear or disappear.
•MY IMAGE: Displays the MY IMAGE menu (60).
| This item is to assign an input signals to MY SOURCE / |
| DOC. CAMERA button on the remote control (6, 18). |
MY SOURCE | Using the ▲/▼ buttons sets one of the following input |
signal. |
RGB1 ó RGB2 ó HDMI 
VIDEO ó
| Selecting this item displays the SERVICE menu. | |||||
| Select an item using the ▲/▼ buttons, and press the ► button or | |||||
| the |
|
|
|
|
|
|
| ENTER | button on the remote control to execute the item. | |||
|
| |||||
|
|
| FANSPEED AUTO ADJUST GHOST FILTER MESSAGE LENS TYPE | |||
SERVICE | FACTORY RESET INFORMATION REMOTE FREQ. REMOTE RECEIV. KEY LOCK | |||||
FANSPEED | ||||||
| Using the ▲/▼ buttons switches the rotation speed | |||||
| of the cooling fans. The HIGH is the mode for use at | |||||
| highlands etc. Note that the projector is noisier when | |||||
| the HIGH is selected. | |||||
| HIGH ó NORMAL | |||||
(continued on next page)
46
