Setting up
Adjusting the projector's elevator
When the place to put the projector is slightly uneven to the left or right, use the | ||
elevator feet to place the projector horizontally. |
| |
Using the feet can also tilt the projector in order to project at | 10° | |
a suitable angle to the screen, elevating the front side of the | ||
| ||
projector within 10 degrees. |
| |
This projector has 2 elevator feet and 2 elevator knobs. An elevator foot is | ||
adjustable while pulling up the elevator knob on the same side as it. | ||
1. Holding the projector, pull the elevator knobs up to loose the elevator feet.
2. Position the front side of the projector to the desired height.
3. Release the elevator knobs in order to lock the elevator feet.
4. After making sure that the elevator feet are locked, put the projector down gently.
5. If necessary, the elevator feet can be manually twisted to make more precise adjustments. Hold the projector when twisting the feet.
To loose an elevator foot, |
|
pull up the elevator knob | To finely adjust, twist |
on the same side as it. | the foot. |
CAUTION ►Do not handle the elevator knobs without holding the projector, since the projector may drop down.
►Do not tilt the projector other than elevating its front within 10 degrees using the adjuster feet. A tilt of the projector exceeding the restriction could cause malfunction or shortening the lifetime of consumables, or the projector itself.
Using the security bar and slot
A commercial
Also this product has the security slot for the Kensington lock.
For details, see the manual of the security tool.
WARNING ►Do not use the security bar and the security slot to prevent the projector from falling down, since it is not designed for it.
Security bar
Anti-theft chain or wire
Security slot
NOTE • The security bar and the security slot are not |
|
comprehensive theft prevention measures. They are intended |
|
to be used as supplemental theft prevention measure. | 9 |
