SETUP menu
SETUP menu (continued)
Item
Description
| Using the ▲/▼ buttons corrects the horizontal keystone distortion. | |
| Shrink the right of the image ó Shrink the left of the image | |
| • The adjustable range of this function will vary among inputs. For | |
| some input, this function may not work well. | |
KEYSTONE | • When the zoom adjustment is set to the TELE (telephoto focus), this | |
function may be excessive. This function should be used when the zoom | ||
| adjustment is set to the full WIDE | |
| • When the vertical lens shift is not set fully upward (not set fully | |
| downward for the optional lens type | |
| function may not work well. | |
| • This function will be unavailable when the Transition Detector is on (53). | |
| Using the ▲/▼ buttons turns off/on the whisper mode. | |
WHISPER | NORMAL ó WHISPER | |
• When the WHISPER is selected, acoustic noise and screen | ||
| ||
| brightness are reduced. | |
| Using the ▲/▼ buttons switches the mode for mirror status. | |
MIRROR | NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT | |
| If the Transition Detector is TURN ON and MIRROR status is | |
| changed, Transition Detector Alarm (53) will be displayed when | |
| projector is restarted after the power switch is turned off. | |
| The combination of a picture shown on screen and output from the | |
| RGB OUT port can be arranged in the menu. | |
| The picture coming into the port selected in the (2) is output to the RGB | |
| OUT port while an image from the port chosen in the (1) is on screen. | |
| (1) Choose a picture input port using ▲/▼ buttons. | |
| QUIT ó RGB1 ó RGB2 ó HDMI | |
| STANDBY ó VIDEO ó | |
| • Choose STANDBY, to select the output signal from the RGB OUT | |
| port in the standby mode. | |
MONITOR OUT | • While QUIT is selected, pressing the ◄ button returns to the | |
previous menu. | ||
| ||
| (2) Select one of the RGB ports using ◄/► buttons. | |
| Choosing the RGB1 allows the following choice. | |
| RGB1 ó OFF | |
| Choosing the RGB2 allows the following choice. | |
| RGB2 ó OFF | |
| Choosing other input or STANDBY allows | |
| the following choice. | |
| RGB1 ó RGB2 ó OFF | |
| • OFF disables the RGB OUT port. |
37
