OPTION menu

OPTION menu (continued)

Item

Description

 

4. Using the Transition Detector Function

 

While the Transition Detector function is ON, when power switch is started to

 

supply to the projector, it might react as below.

 

• Transition Detector alarm shown below might appear on screen, if the

 

projector has been moved or re-installed.

 

• Transition Detector alarm might appear on screen, if the MIRROR setting

 

has been changed.

 

• Keystone adjustment feature has been prohibited as long as the Transition

 

Detector function is ON.

 

4.1 Turning On the Transition Detector Function

 

4.1-1 Use the ▲/▼ buttons on the SECURITY menu to

 

 

select Transition Detector and press the ► or the

 

 

 

ENTER

button to display the Transition Detector on/

 

 

off menu. Select TURN ON and the current angle

 

 

and mirror setting will be recorded.

 

• This feature may not function properly if the projector is

 

not in a stable position when TURN ON is selected.

 

4.1-2 If this function is set to TURN ON when the

 

 

vertical angle of the projector or mirror setting

 

 

at which the projector is turned on is different

 

 

than the previously recorded, the Transition

 

 

Detector Alarm will be displayed and the

 

 

projector will not display the input signal.

SECURITY

Set the Transition Detector off in the SECURITY menu to display the input signal.

If the Transition Detector ALARM is displayed for about 5 minutes, the lamp will turn

(continued)

off.

 

This function will activate only when the projector is started after the power

 

switch was turned off.

 

4.2 Setting the Transition Detector PASSWORD

 

4.2-1 Use the ▲/▼ buttons on the SECURITY menu to select Transition

 

 

Detector and press the ► or the

 

ENTER

button to display the

 

 

Transition Detector on/off menu.

 

4.2-2 Use the ▲/▼ buttons on the Transition

 

 

Detector on/off menu to select TURN ON.

 

 

The ENTER PASSWORD BOX (small) will be

 

 

displayed.

 

4.2-3 Use the ▲/▼/◄/► buttons to enter a

 

 

PASSWORD. Move the cursor to the right side of

 

 

the ENTER PASSWORD BOX (small) and press

 

 

the ► button to display the PASSWORD AGAIN

 

 

BOX, enter the same PASSWORD again.

4.2-4 Move the cursor to the right side of the PASSWORD AGAIN BOX and press the

button to display the PASSWORD for about 20 seconds, please make note of the PASSWORD during this time.

Pressing the ENTER button on the remote control or the INPUT button on the projector will return to the Transition Detector on/off menu.

• Please do not forget your Transition Detector PASSWORD.

(continued on next page)

53

Page 53
Image 53
Dukane 9136 user manual Using the Transition Detector Function, Turning On the Transition Detector Function