NETWORK menu
NETWORK menu (continued)
Item | Description |
(1)Use the▲/▼ buttons on the NETWORK menu to select the PROJECTOR NAME menu and press the ► button. The PROJECTOR NAME dialog will be displayed.
(2)The current PROJECTOR NAME will be displayed on the first 3 lines. If not yet written, the lines will be blank.
Use the ▲/▼/◄/► buttons and the ENTER or INPUT
button to select and enter characters. The RESET button can be used to erase 1 character at a time. Also if you move the cursor to DELETE or ALL CLEAR on screen and push
| the ENTER or INPUT button, 1 | |
| character or all characters will be | |
| erased. | |
PROJECTOR | The PROJECTOR NAME can be | |
input up to 64 characters. | ||
NAME | ||
(3) To change an already inserted | ||
| ||
| character, press the ▲/▼ button to | |
| move the cursor to one of the first 3 | |
| lines, and use the ◄/► buttons to | |
| move the cursor on the character | |
| to be changed. After pressing | |
| the ENTER or INPUT button, the | |
| character is selected. Then, follow | |
| the same procedure as described at | |
| the item (2) above. |
(4)To finish entering text, move the cursor to the SAVE on screen and press the ENTER or INPUT
button. To revert to the previous PROJECTOR NAME without saving changes, move the cursor to the CANCEL on screen and press the ENTER or INPUT
button.
(continued on next page)
59
