Figure 8-1: Routing

Note:

If there is an entry or entries in the Routing table with an Index of zero (0), these are System entries. You cannot modify or delete these entries.

Settings – Routing

Dynamic

RIP v2 – This acts as “master” switch. If enabled, the selected WAN or LAN

Routing

will run RIPv1/v2, otherwise they don’t have RIP function.

 

LAN, WAN1, WAN2 – If enabled, any WAN or LAN can execute RIP function.

 

 

Entry Index

 

If adding a new entry, ignore this field.

 

To edit an existing entry, select it from the list, and click the "Select" button.

 

The screen will then update with the data for the selected entry.

 

If the Index is 0, this is a System entry that you can neither delete nor modify.

 

 

Network

The network address of the remote LAN segment. For standard class "C" LANs,

Address

the network address is the first 3 fields of the Destination IP Address. The 4th

 

(last) field can be left at 0.

Netmask

The Network Mask for the remote LAN segment. For class "C" networks, the

 

default mask is 255.255.255.0

Page 60

Page 64
Image 64
Edimax Technology Edimax user guide Router manual Settings Routing