Advanced PPPoE
The screen is required in order to use multiple PPPoE sessions on the same WAN port. It can also be used to manually connect or disconnect a PPPoE session.
| Figure 4: Advanced PPPoE |
Settings – Advanced PPPoE | |
|
|
WAN Port | Select the desired Port and Session, then click the "Select" button. The data |
PPPoE Session | for the selected Port/Session will then be displayed in the WAN IP Account |
| section. |
Session MTU | The Maximum Transfer Unit for PPPoE packet data. Leave it as default, |
| unless the ISP offers different PPPoE packets data size. |
WAN IP Account | • User Name – Enter the PPPoE user name assigned by your ISP. |
| • Password – Enter the PPPoE password assigned by your ISP. |
| • Verify Password – |
| • IP Address – If you have a fixed IP address, enter if here. Otherwise, this |
| field should be left at 0.0.0.0. |
| • Host Name – This field is used by a Host to uniquely associate an access |
| concentrator to a particular Host request. |
Action | Use the "Connect" and "Disconnect" buttons to establish or terminate a |
| connection on this session, if required. |
Connection | This displays the current connection status for each session. |
Status |
|
| Page 23 |
