33
8.1.6. System
The “System” allows users to setup the camera’s parameters, like camera name, data/time setting. And also
provide firmware upgrade and reset tools at this page.
System
Camera Name The default camera name is “IC1500 or IC1500Wg”. It is recommended to name
a meaningful name for the camera.
Login Name Setup your administrator account’s login name. Default name is “admin”
Password Enter up to 4 digits password for the new user account.
Confirm Password Enter the password again to confirm the setting.
Set Date/Time manually Set the current Date and Time.
NTP Server Synchronize the Date and Time with NTP server.
Time Zone Select the time zone that your camera put on.
NTP Server Specify the IP Address of the NTP Server.
Upgrade Firmware You can upgrade camera’s firmware via this function. Press the browse button,
find the correct firmware and press upgrade.
Reset to Factory Defaults If you want to reset all the camera settings to default, click this button.
Reboot Device To reboot the Internet Camera, click “Reboot”.
LED Setting There are four LEDs to indicate the status of Internet Camera. If you wan to
secure the camera from noticing, you can turn off the LED light by clicking “LED
Light OFF”. To turn on the LED light, click “LED Light ON”.