PPP Troubleshooting

Capture a PPP Trace for Debugging

1.Unplug DSL cable.

2.Using Simple setup, enter username/password.

3.Select Transfer form the main menu, then select Capture Text.

4.Enter the following command via console:

ppp event {1-9} (9 displays all PPP information) event show (enables logging)

5.Insert DSL cable.

6.Once showtime (DSL sync) is reached, the 5667 will attempt to connect.

7.Capture log for an unspecified amount of time.

8.Stop capture.

9.Enter the command ‘event unshow’ to turn off logging.