15
Chapter 2 Adjusting Screen
2 Prepare the display pattern for the analog display adjustment.
Windows
1. Load t he “EIZO LCD Utility Disk” to your PC.
2. Sta rt the “Screen Adjustment Utility” from t he startup menu. If it cannot be sta rted, open the
screen adjustment pattern  les.
Other than Windows
Download the "Screen adjustment patt ern les" from our site: http://www.eizo.com
NOTE
• For detai ls and instructions on op ening the “Screen adjust ment pattern les”, refer to “Readme.txt ” le.
3Perform the auto adjustment again with the analog screen adjustment pattern

displayed.

● To adjust ickering, screen posit ion, and screen size automatically [Auto Adjustment]
Procedure
1. Display Patte rn 1 in full screen on the monitor using t he “Screen Adjustment Utility” or the screen
adjustment patternle s.
2. Choose <Sc reen> from the Adjustment menu, and press .
3. Choose <A nalog Adjustment> from the <Screen> menu, and press .
To proceed with the subsequent adjustment s, select an item in <Analog Adjustment > of the <Screen> menu.
4. Choose <Auto Adjustme nt>, and press .
The auto adjustment func tion works (the message “In Progress” appea rs) to adjust the ickering, screen posit ion,
and screen size correct ly.
When the auto adjustment is com pleted, a message appears. Select “OK” to con rm the new settings or “Ca ncel”
to restore the previous sett ings, and press .
If the screen is not displayed correctly even afte r adjusting in step 3 above, perform the adjustment s
according to the procedures on the following page s. When the screen is displayed correctly, go to step
5 “To adjust color gradation automatically [Range]”.